There is no direct integration between Medtronic and Enhance-d (yet), but you can use a workaround involving third-party tools. This method allows you to send glucose data from Medtronic CareLink to Enhance-d through Nightscout.
These solutions are DIY and Open Source, and as such, any acquisition of information from these sources should be used for informational purposes only and should not used for any medical decisions or treatments.
Step-by-Step Guides:
Android
How the Data Flows:
📡 Medtronic Pump → 🩸 Medtronic App → 🌐 Medtronic Carelink Servers → 📲 xDrip+ App → 🌐 Nightscout Website → 📲 Enhance-d App
Create A nightscout site
Nightscout is a personal website to host your glucose data on, that you can integrate with many DIY solutions (garmin watches, bedsite clocks, alexa etc.)
There are many ways you can setup and host your personal Nightscout website to store and forward glucose data.
Follow the setup guides at https://nightscout.github.io/ for more information, or check out Nightscout4U to create a free Nightscout account.
Install xDrip+
Download and install xDrip+ on your Android device.
🔗 Download xDrip+
Set Up xDrip+ to get data from Medtronic Carelink
Go to Settings → Data Sources.
Select Hardware Data Source and choose CareLink Follower (you may need to select another option during first setup setup).
🔗 Guide to Setting Up xDrip+ with CareLink
Configure xDrip+ to Upload Data to Nightscout
In xDrip+, go to Cloud Upload Settings.
Enable Upload to Nightscout.
Enter your Nightscout URL and API Secret (found in your Nightscout4U account).
Check That Nightscout Is Receiving Data
Open your Nightscout website in a browser.
Confirm that your glucose data from Medtronic is appearing.
If not, go back to xDrip+ and select Backfill Data under Extra Options → Nightscout Sync Settings.
Integrate Nightscout with Enhance-d
Open the Enhance-d app.
Go to Integrations.
Select Nightscout and enter:
✅ Your Nightscout URL
✅ Your API Secret from your Nightscout4U accountSave the settings.
🚀 Once set up, your Medtronic glucose data will automatically sync to Enhance-d via Nightscout!
Apple iOS
How the Data Flows:
📡 Medtronic Pump → 🩸 Medtronic App → 🌐 Medtronic Carelink Servers → 📲 Guardian Monitor App → 🌐 Nightscout Website → 📲 Enhance-d App
Create A nightscout site
Nightscout is a personal website to host your glucose data on, that you can integrate with many DIY solutions (garmin watches, bedsite clocks, alexa etc.)
There are many ways you can setup and host your personal Nightscout website to store and forward glucose data.
Follow the setup guides at https://nightscout.github.io/ for more information, or check out Nightscout4U to create a free Nightscout account.
Install Guardian Monitor
Download and install Guardian Monitor from the app store on your device.
🔗 Download Guardian Montor
Log into Guardian Monitor with your CareLink details
When prompted for your carelink details, log into the Guardian Monitor app, log in using your Carelink credentials.
You can find help for this app via facebook here.
Configure Guardian Monitor to Upload Data to Nightscout
In Gudardian Monitor go into the settings
Enable Upload to Nightscout.
Enter your Nightscout URL and API Secret (found in your Nightscout4U account).
Check That Nightscout Is Receiving Data
Open your Nightscout website in a browser.
Confirm that your glucose data from Medtronic is appearing.
If not, go back to xDrip+ and select Backfill Data under Extra Options → Nightscout Sync Settings.
Integrate Nightscout with Enhance-d
Open the Enhance-d app.
Go to Integrations.
Select Nightscout and enter:
✅ Your Nightscout URL
✅ Your API Secret from your Nightscout4U accountSave the settings.
🚀 Once set up, your Medtronic glucose data will automatically sync to Enhance-d via Nightscout!
Important Notes
🛑 Use at Your Own Risk: xDrip+ and Nightscout are free, open-source applications and should not be used for treatment decisions.
💡 Need Help?
If you need assistance setting this up, feel free to reach out at [email protected].